Forging process of stainless steel plate

1. die forging 　　 

For socket welding and threaded tees, crosses, elbows and other small-size pipe fittings, its shape is more complicated, and die forging can be used. The blanks used in this process should be rolled profiles. If stainless steel plates are used as raw materials, the rolled profiles of steel ingots must be prepared first. After being heated, the blank is put into the die for forging, and the pressure makes the metal flow to fill the cavity; if the blank after die forging has flash, it will go through the step of flushing the remaining material to complete all the forging work. 　

2. free forging 　　 

For special-shaped pipe fittings or stainless steel plates that are not suitable for die forging, they can be manufactured by free forging process. Free forging should forge the general shape of the pipe. 　　

3.cutting 

For some cylindrical stainless steel plates, rods or thick-walled pipes can be directly cut and processed. When processing, the fiber flow direction of the metal material should be roughly parallel to the stainless steel axis. For tees, crosses, and elbows, bars should not be used. The material is directly cut and processed into shape.

 

HCADTO Stainless Steel Co., Ltd. the Stainless Steel Division of ADTO GROUP, specializes in manufacturing stainless steel pipes, stainless steel angle bar, flat bar, round bar, square bar, hexagonal bar and channel bar in various grades and sizes. Our years of production experience and manufacturing facilities will ensure the good quality and competitive duration of our products.