Compare the welding methods of stainless steel pipes

High-frequency welding High-frequency welding: With higher power, it can reach a higher welding speed for steel pipes of different materials and outer diameter and wall thickness. Compared with argon arc welding, it is more than ten times the maximum welding speed. Therefore, the consumption rate of stainless steel pipes for common use has a higher consumption rate. Due to the high high-frequency welding speed, it is difficult to remove the burrs in the welded pipe. 

Combination welding methods include: argon arc welding and plasma welding, high frequency welding and plasma welding, high frequency preheating and three torch argon arc welding, high frequency preheating and plasma plus argon arc welding. Combination welding improves the welding speed very significantly. Regarding the weld quality of the combined welded steel pipe using high-frequency preheating, it is equivalent to conventional argon arc welding and plasma welding. The welding operation is complicated, and the entire welding system is easy to be automated. This combination is easy to connect with existing high-frequency welding equipment and investment Low cost and good efficiency.

HCADTO Stainless Steel Co., Ltd. the Stainless Steel Division of ADTO GROUP, specializes in manufacturing stainless steel pipes, stainless steel angle bar, flat bar, round bar, square bar, hexagonal bar and channel bar in various grades and sizes. Our years of production experience and manufacturing facilities will ensure the good quality and competitive duration of our products.