How to choose stainless steel plate

1 The selection of stainless steel plates should consider the operating conditions, such as manual or automatic operation, the performance and type of the hot press, and the quality requirements of the pressed material such as hardness and gloss.

2 Economic calculations must also be considered. Each time a new steel plate is polished, it is required to produce a low-quality decorative plate. 

3 In addition, when selecting the most reasonable thickness of the steel plate, its service time, quality and rigidity should be considered, and the strength requirements of the plate under compression; heat conduction performance; pressure distribution, and the width of the plate should be considered. If the thickness of the steel plate is not enough, it is easy to bend, which will affect the production of decorative panels. If the thickness is too large, the steel plate is too heavy, which not only increases the cost of the steel plate, but also brings unnecessary difficulties to the operation.

4 At the same time, the margin that should be left when the stainless steel plate is processed or used. The thickness of the copper plate is not absolutely consistent, but the thickness of the same steel plate is as consistent as possible. Generally, the thickness tolerance of the medium-sized saw plate is 0.05 to 0.15 mm. If the requirements are too strict, the grinding costs will also increase. Generally, it is a steel plate with high tensile strength and high hardness. The greater the resistance to mechanical damage, the longer the durability of use, but the cost of grinding and processing is also higher.

 

HCADTO Stainless Steel Co., Ltd. the Stainless Steel Division of ADTO GROUP, specializes in manufacturing stainless steel pipes, stainless steel angle bar, flat bar, round bar, square bar, hexagonal bar and channel bar in various grades and sizes. Our years of production experience and manufacturing facilities will ensure the good quality and competitive duration of our products.