Blanking Requirements for Stainless Steel Pipe

Before the construction of stainless steel pipes, it is necessary to process them and formulate the required specifications. Here, we will explain the baiting requirements for you.

1. If the stainless steel pipe needs to be connected, should connect the whole plate, and the submerged arc automatic welding is used. After the flaw detection is qualified, the material will be numbered and cut;

2. The samples should be released for blanking, the welding shrinkage allowance and processing allowance during production and installation should be reserved according to the process requirements;

3. Groove welding between the stainless steel pipe and the beam, the beam, the column plate and the end plate are the second-class welds;

4. If the flatness and straightness of the steel are out of tolerance, it should be corrected first, and then cut.

It is necessary to master the blanking requirements of stainless steel pipes, so the performance of the product will increase, and the product quality will become better.

HCADTO Stainless Steel Co., Ltd. the Stainless Steel Division of ADTO GROUP, specializes in manufacturing stainless steel pipes, stainless steel angle bar, flat bar, round bar, square bar, hexagonal bar and channel bar in various grades and sizes. Our years of production experience and manufacturing facilities will ensure the good quality and competitive duration of our products.