Surface Working for Stainless Steel Plate

Regarding the manufacturing processes of stainless steel plates, many customers know very less about them. The stainless steel plate manufacturer HCADTO Stainless Steel Co., Ltd. will make a detail introduce to you:

The appearance of the stainless steel plate: The stainless steel plate is shine and beautiful. How to make it so beautiful?

There are five types of surface working that can be used for stainless steel plates. The are: rolling surface processing, mechanical surface processing, chemical surface processing, texture surface processing and color surface processing.

Also there some special surface working, but no matter which surface working is specified, the following steps should be followed:

1. The manufacturer shoule make sure the type of surface working, and it is best to make a sample as the standard for mass production in the future;

2. When using a large number (such as a composite board), it must be ensured that the coil used is the same batch;

3. In many construction applications, such as the interior of elevators, although the fingerprints can be wiped off, they are not beautiful. If you choose a cloth surface, it is not so obvious. Mirror stainless steel plates must not be used in these places;

4. The production process should be considered when selecting the surface processing. For example, in order to remove the weld bead, the weld may have to be ground and the original surface processing must be restored. (The tread plate is difficult or even unable to meet this requirement);

5. For some surface processing, grinding and polishing lines are directional, which is called unidirectional. If you make this line vertical rather than horizontal when used, dirt will not stick to it easily and it is easy to clean;

6. No matter what kind of finishing is used, it needs to increase the process steps, so it will increase the cost. Therefore, be careful when choosing the surface processing;

7. It is not recommended to use alumina as an abrasive, unless you are very careful during use. It is best to use silicon carbide abrasives.

The above is the introduction of some processing techniques of stainless steel plate manufacturers for stainless steel plate, I hope they are helpful for you.

Changsha HCADTO Stainless Steel Co., Ltd. has been engaged in the stainless steel plate industry over 20 years and has now become a leader in the stainless steel industry. The main stainless steel decorative plate, mirror stainless steel plate and color stainless steel plate lead the research and development, production, sales, storage and logistics system of stainless steel products. If you have any need, get us in touch.